High Precision Cleanness Meter
Model THEZ-MS-002
A portable, self-calibrating cleanliness meter that reads surface gloss quickly and continuously. Built for stone, tile, car paint, plastics and polished metal.
Pocket-sized. Fast. Calibrated for you.
The THEZ-MS-002 turns surface gloss into a clear cleanliness reading, so cleaning results can be checked on the spot instead of judged by eye.
Compact and lightweight
About the size of a name card and easy to carry around, whether on a job site or a factory floor.
Fast, accurate reading
Each single measurement takes under one second and returns an accurately measured value.
Continuous mode
Long-press for 1 second to switch on continuous measurement and scan a surface as you move across it.
Self-calibration
The meter calibrates itself. No manual adjustment is needed before use.
High-endurance battery
Up to 10,000 continuous measurements after a single full charge.
Multi-surface capability
Reads glare from stone, tile, car paints, plastics and polished metal surfaces.
One scale: gloss units (GU)
The meter reports how strongly a surface reflects light. Dirt and residue scatter light, so a cleaner surface reads higher within its material class.
0 to 10 GU Matte
Reflects almost no light. The surface is rough or very fine-textured.
10 to 70 GU Semi-gloss
Reflects a moderate, medium sheen.
70+ GU High gloss
Clearly reflects light from a smooth, shiny surface.
Reference ranges by surface
Typical readings for each condition. Compare a measurement with the matching range to judge whether a surface is dirty, clean or glossy.
Furniture cleanliness
Car body cleanliness
Specifications
| Product | High Precision Cleanness Meter (portable cleanliness meter) |
|---|---|
| Model | THEZ-MS-002 |
| Design origin | American design |
| Measurement unit | Gloss units (GU) |
| Measurement time | Under 1 second per single measurement |
| Measurement modes | Single measurement; continuous measurement (long-press for 1 second) |
| Battery endurance | Up to 10,000 measurements per full charge |
| Calibration | Self-calibration, no manual adjustment |
| Suitable surfaces | Stone, tile, car paints, plastics, polished metal |
| Form factor | Compact and lightweight, similar in size to a name card |
Proudly American design
The THEZ-MS-002 is an American design. Its development was led by a clear goal: give professionals a pocketable instrument that makes cleanliness measurable, repeatable and quick.
What American design means for this meter:
- Simple operation with self-calibration and no manual setup
- A compact, portable form made for the field
- A clear reading on a single, consistent gloss scale
Warranty and care
Warranty instructions
Keep the packing box for at least 30 days. It is required to ensure safe transportation.
Non-warranty regulations
- Unauthorized repair, misuse, accident, modification, or use of non-official accessories.
- Instrument is out of warranty.
- Damage caused by force.
- Not listed as a performance failure in the product failure table.
- Performance failure caused by human factors.
Safety warnings
- Do not attempt to disassemble or replace any part of the equipment.
- Contact the agent or official customer service for after-sales service.
- Do not place the equipment near heat sources or expose it directly to fire.
- If any liquid enters the equipment, power it off immediately.
- This product contains small parts. It may cause suffocation or other hazards if swallowed by children.